Wright Austin Stainless Steel Type T Gas Liquid Separators

SIZE SS CONNECTION PART NUMBER
1" 316 SS FNPT, 500 PSI @ 300°F 1TS6
SWE, 500 PSI @ 300°F 1TWS
150# RF ANSI FLANGED, 150 PSI @ 450°F 1T150S6
300# RF ANSI FLANGED, 500 PSI @ 300°F 1T500S6
1¼" 316 SS FNPT, 500 PSI @ 300°F 1.25TS6
SWE, 500 PSI @ 300°F 1.25TWS6
150# RF ANSI FLANGED, 150 PSI @ 450°F 1.25T150S6
300# RF ANSI FLANGED, 500 PSI @ 300°F 1.25T500S6
1½" 316 SS FNPT, 500 PSI @ 300°F 1.5TS6
SWE, 500 PSI @ 300°F 1.5TWS6
150# RF ANSI FLANGED, 150 PSI @ 450°F 1.5T150S6
300# RF ANSI FLANGED, 500 PSI @ 300°F 1.5T500S6
2" 316 SS FNPT, 500 PSI @ 300°F 2TS6
SWE, 500 PSI @ 300°F 2TWS6
150# RF ANSI FLANGED, 150 PSI @ 450°F 2T150S6
300# RF ANSI FLANGED, 500 PSI @ 300°F 2T500S6
2½" 304 SS 150# RF ANSI FLANGED, 150 PSI @ 450°F 2.5T150S
300# RF ANSI FLANGED, 500 PSI @ 300°F 2.5T500S
3" 304 SS 150# RF ANSI FLANGED, 150 PSI @ 450°F 3T150S
300# RF ANSI FLANGED, 500 PSI @ 300°F 3T500S
4" 304 SS 150# RF ANSI FLANGED, 150 PSI @ 450°F 4T150S
300# RF ANSI FLANGED, 500 PSI @ 300°F 4T500S
5" 304 SS 150# RF ANSI FLANGED, 150 PSI @ 450°F 5T150S
300# RF ANSI FLANGED, 500 PSI @ 300°F 5T500S
6" 304 SS 150# RF ANSI FLANGED, 150 PSI @ 450°F 6T150S
300# RF ANSI FLANGED, 500 PSI @ 300°F 6T500S
8" 304 SS 150# RF ANSI FLANGED, 150 PSI @ 450°F 8T150S
300# RF ANSI FLANGED, 500 PSI @ 300°F 8T500S
10" 304 SS 150# RF ANSI FLANGED, 150 PSI @ 450°F 10T150S
300# RF ANSI FLANGED, 500 PSI @ 300°F 10T500S
12" 304 SS 150# RF ANSI FLANGED, 150 PSI @ 450°F 12T150S
300# RF ANSI FLANGED, 500 PSI @ 300°F 12T500S
Performance Overview
T air/liquid separators are designed to remove entrained liquid and solids from air, gas or steam.  This specific design is effective for applications where the entrained liquid flow rate is up to 40% by weight of the units flow capacity.

When properly sized, this air liquid separator will remove up to 99% of all liquid and solids greater than 10 microns in size from an air, steam or industrial gas flow.  The removal is accomplished by a design that causes the gaseous media to enter a controlled centrifugal flow.  This results in forcing the entrained material to the outer wall and the VCP prevents re-entrainment.

Stainless steel T separators are constructed to ASME code for unfired vessels, Section VIII, Division 1 but NOT stamped.  An ASME stamp and CRN registration is available for sizes 2 inches and larger.

Options:
To upgrade from 304 SS to 316SS contact our office for pricing
• 1/2" thermometer connection
larger drain size

Engineering Information:
Air Sizing Chart
Steam Sizing Chart

Formulas and Constants

Outline Drawings:
Click the part number for its respective outline drawing (Outline drawings for other separators not shown):
4" 150# flanged connections (316SS)
6" 150# flanged connections (316SS)

Lead Time:
Components to build cast (1" through 2") gas/liquid separators are usually stocked items and shipments are made within 7-10 days after receipt of an order.

Fabricated separators have a lead time of 8-12 weeks.

If the lead time is critical, please contact our office and obtain a lead-time estimate based upon the current manufacturing backlog.

If you need assistance with proper selection and for pipeline sizes > 12", different pressure classes or materials, please fill-out our
inquiry form.